Kashimura NKW-53 Qi2 Powerful Magnetic Wireless Charger with Peltier Element and Cooling Fan, Cooling Function, Suction Cup Mount, Low Angle

Price: $51.90
(as of Feb 10, 2026 09:10:07 UTC – Details)

● Built-in neodymium magnets, easily adsorb and hold your iPhone using MagSafe compatible iPhone and MagSafe compatible case.
3-layer cooling structure allows heat dissipation while charging.
(Equipped with tempered glass on the charger surface, built-in Peltier elements, and a super quiet cooling fan. )
The cooling fan with rainbow LED and Peltier elements automatically start when charging starts.
(It will automatically shut off after you remove your smartphone. )
Supports rapid charging up to 15 W.
(Supports rapid charging devices and a USB power supply rated at 9V 3A. )
LED indicates the status of the current status.
(Green lighting: power on the main unit / blue lighting: charging / flashing patina – abnormal)
Low position suction cup mount part.
It is installed in a low position that does not interfere with your vision while driving. You can also adjust the angle up and down.
Uses ball joints.
The angle can be adjusted to 360° for easy viewing after installation.
Screw down clip secures to air conditioner fins.
The support arm firmly supports the holder to prevent it from tilting forward.
USB power cable included.
Please do not use this product for anything other than this product.
Comes with safety and peace of mind.
Over Current Protection, Over Voltage Protection, Over Heat Protection, Foreign Object Detection Protection.

Cannot be used if the smartphone weighs over 10.6 oz (300 g), including protective case.
If you use a case with a thickness of 0.08 inch (2 mm) or more, it will interfere with the heat dissipation of your smartphone and may not charge it rapidly.
USB power supply is not included. Requires USB power rated at 5V 3A or USB Power Delivery 2.0 or above. USB power supply rated below may result in reduced cooling effect and charging time. If this product is attached to a MagSafe compatible case, there will be a ring mark on the MagSafe case side.
MagSafe Compatible Devices: 15 W Output; 5 W Output for non-compatible devices (iPhone 12 requires iOS version 17.4, and iOS version 17.2 or higher for iPhone 13 or later)
Original MagSafe charger equals charging speed and high power retention until full charge (iPhone 15W rapid wireless charging requires a DC-USB rated at 9V 3A or PD2.0 or higher)
3-layer cooling structure, heat dissipation while charging (charger surface uses tempered glass, built-in peltier elements, cooling fan)
The cooling fan and Peltier element will automatically start at the start of charging (automatically shut off after about 25 seconds after removing the smartphone)
Includes a low angle suction cup that allows you to freely adjust the angle